Cutting a mower down to one horse size?

DAPNET Forums Archive › Forums › Equipment Category › Equipment › Cutting a mower down to one horse size?

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • November 5, 2008 at 9:42 pm #39872
    cherprit
    Participant

    Have any of you cut down a mower down to a one horse mower?

    November 6, 2008 at 12:37 am #47885
    Carl Russell
    Moderator

    I have a New Idea mower with a 5 foot bar that I added shafts to so that I could mow with the mare alone. I did nothing to the mower, just cut off the pole and added an A-frame and shafts. She was a good sized mare, 1800ish.
    Carl

    November 6, 2008 at 3:56 pm #47887
    cherprit
    Participant

    I did read about someone on the Rural Heritage site that cut down the blade to 4 feet. My mare isn’t quite that big. I’m taking my #7 to an old teamster on Saturday to see what he thinks. I might just have to wait until i get a teammate for my mare.

    November 7, 2008 at 1:40 am #47890
    TBigLug
    Participant

    Just curious, have you tried her with the mower as-is? It may work if you let her rest more frequently. How long is the bar now?

    November 7, 2008 at 4:08 pm #47888
    cherprit
    Participant

    Thanks for the replies. I haven’t tried her on the mower yet – would I just make up a set of shafts for it? I’ve only had it a week, and it does need a few small parts – off to get those on Saturday. It’s a 5′ blade.

    November 8, 2008 at 2:36 am #47891
    TBigLug
    Participant

    I would imagine you could fab up a set of shafts. Mybe mount it with a reciever style hitch so you could swap out shafts for a pole when you get a team. Just an idea.

    November 8, 2008 at 2:48 am #47886
    Crabapple Farm
    Participant

    I’ve got a #7 One Horse mower, the main differences I see between it and a mower made for a team: 4′ bar, shafts, narrower frame & chassis.
    The bar can be cut down easily by someone with the tools and knowledge. But with a well tuned mower and horse, and rests, you might not need to cut a 5′ down.
    You can make (or have made) a set of shafts easily enough. Cut the tongue (assuming it wasn’t cut already) or better yet make a stub tongue based on the original, so that you can switch it back later if you want to use it with a team.
    The frame/chassis you can’t modify. A One Horse mower built as such is narrower, with the cutter bar starting just over a half a horse width from the tongue, whereas a team mower is designed to fit a whole horse between the tongue and standing grass. Plus, the narrower frame weighs less. So you’ll have to teach her to walk the right distance away from the edge, and there will be a little more weight than if it was a “real” One Horse Mower. (remember: at the turn of the century, most folks were using horses more in the 1400 lb range than 1800)
    Get it as well tuned as you can, because a smooth running mower pulls much easier than one that doesn’t run smooth.

    November 10, 2008 at 11:34 pm #47889
    cherprit
    Participant

    I took my #7 to the 82 year young teamster last weekend. He showed me two parts missing, a spring and the stay rod. Other than that it’s in great shape. When I asked him about cutting it down into a one horse, he looked at me like I had just grown two heads…………

    November 11, 2008 at 12:40 am #47892
    TBigLug
    Participant

    @cherprit 3453 wrote:

    When I asked him about cutting it down into a one horse, he looked at me like I had just grown two heads…………

    LOL I can see it now. I think you could do it with one horse. You could even fab ub a set of shafts that would put your horse right next to the uncut hay so you don’t have to keep it in the middle or side.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.