DAPNET Forums Archive › Forums › Market Place › Buy/Sell Equipment › 594 John Deere hay rake
- This topic has 5 replies, 4 voices, and was last updated 13 years, 11 months ago by TropicalHarvest.
- AuthorPosts
- June 6, 2009 at 8:47 pm #40614firebrick43Participant
I found a good deal on a roll a bar hay rake so this rake has to go. I really don’t want to cut it up for scrap so make me an offer. It has good teeth, many 1 year old, good gear box excellent wheels, works good. Bad, the rear wheel hub retainers are no the best. Also the left side center basket support would be best if it was bushed.
If you need parts let me know
September 29, 2009 at 6:20 pm #52811AnonymousInactiveI assume you may have sold this by now. I am trying to find some parts to a 594 hay rake which i have. Namely, the assembly that turns the tynes. This has a cast iron housing and gears and connects on to the end of the rake unit. If I can not find the entire assembly I am looking for one of the idler gears that fit in this unit. This is about 7″ in diameter and has 26 teeth. It is exposed from the back side. Any help you can provide is appreciated, thanks peterellis
September 29, 2009 at 8:04 pm #52809john plowdenParticipantI may have what you need – can you post a pic?
JohnOctober 14, 2009 at 6:07 pm #52812AnonymousInactiveOctober 14, 2009 at 6:17 pm #52810john plowdenParticipantPeter – I have it
JohnNovember 18, 2010 at 4:54 am #52813TropicalHarvestParticipantHello Members,
I am a farmer in Kenya trying to bring a relatively good JD 594 back to useful life. I am missing the Rachet Plates (removable gears that are in each of the wheels) that are used to couple the wheels to the driving mechanism (the shaft) that drives the gearbox. Do you have these?
- AuthorPosts
- You must be logged in to reply to this topic.