DAPNET Forums Archive › Forums › Equipment Category › Equipment › Frost and woods No 10A mower
- This topic has 8 replies, 6 voices, and was last updated 14 years, 4 months ago by Bill Doyle.
- AuthorPosts
- May 28, 2010 at 6:59 pm #41691j_makiParticipant
I just picked up one of these mowers the other day and I am trying to get it working within the next week or two. The mower itself is suppose to be in working condition and all the parts seem to be there. The tongue was pretty much rotten right off and the guy gave me a couple pieces of hardware that he said goes onto the tongue but had no idea how. So if anybody has any pictures of this mower set up I would really appreciate it if you could post them.
Thanks again
Jeremy
June 2, 2010 at 2:08 am #60433j_makiParticipantI tried doing a few searches on the net and have come up with nothing. I really need some help here as there is no one around who has any idea of how to mount the tongue properly.
Jeremy
June 2, 2010 at 2:12 am #60430J-LParticipantI’m sorry maki, I’ve never even heard of one. I asked my dad and some others, but no luck there. Must be a fairly local machine. All I’ve ever seen here was McCormick Deering, John Deere, and Case. Oh and one Emerson Brantingham.
June 2, 2010 at 3:26 am #60432jrwardParticipantLynn Miller has a picture of a woods mower in one of his books. He could probably tell you something about it. Also if you would post a picture of the questionable pieces I might be able to help you out.
June 2, 2010 at 10:55 am #60435dlskidmoreParticipantHere’s a manual, for sale at a reasonable price.
June 2, 2010 at 8:25 pm #60431Joshua KingsleyParticipantI will try to stop by a friends house with a camera in the next day or two. He has one in real good condition. The pictures will show a stub pole as his was either drawn by a tractor last or had a tounge truck.
JoshuaJune 3, 2010 at 10:49 pm #60434j_makiParticipantThanks for the help guys.
I am going to order that manual tonight, I don’t know how I missed that in my search.
Joshua I would really appreciate it if you could get a couple of pictures.
Jeremy
June 12, 2010 at 5:17 pm #60436Bill DoyleParticipantI have just finished rebuilding my Cockshutt 10A mower and have it ready to go to the field. (Just waiting for it to stop raining.) If I can help in any way I sure will. I bought the manual you are talking about and it helped out alot . I need my wife to help with pictures, if you want I can post them later. (I’m new at this.) I am missing the cast iron tool box lid. It should say “Cockshutt Plow Co Brantford Canada” on it. Any one know where I can find one of those??? I know people collect those so does anyone have an extra? I would sure like to buy it!! Thanks
BillJuly 4, 2010 at 2:53 am #60437Bill DoyleParticipantI finally got to mow with my team and 10A mower last week. What a thrill! Everything worked great, but the flywheel seal leaks. (Sounds like that is a common problem with all of them!) Anyway, I still haven’t found a toolbox lid for it and I’m wanting to paint it. Can anyone help me with the proper paint codes for it ? I would like to get it right if I could. I put a picture of it on the gallery, I can,t seem to attach it to this. Hope the picture helps you Jeremy! Thanks
Bill - AuthorPosts
- You must be logged in to reply to this topic.