"D" ring update

DAPNET Forums Archive › Forums › Equipment Category › Equipment › "D" ring update

Viewing 15 posts - 1 through 15 (of 30 total)
1 2
  • Author
    Posts
  • December 9, 2010 at 10:33 pm #42191
    Donn Hewes
    Keymaster

    Here are some pictures from the cutting and reassembling of the first harness. I used it for the first time today plowing a little snow. I worked one D ring with two non d rings and that is a little hard to get it to hold the tongue up properly. All in all I was happy with the way the harness looked on the horse and am eager to make some more.

    I was hoping to make them all the same size, but after setting this one on the mule he definitely needs a smaller front tug. Maybe two inches shorter.

    I have worked him with blinders for the last two years but today I decided to try him with out. No conclusions ,but he went fine. Nice to work three open faced.

    He got his curb chain hook caught on the ring of the neck yoke. Hard to get off, but I saw it happening and was able to get to his head (Maryrose helped) and free him before he got too upset. I have used a leather strap in place of the chain on many bridles and much prefer it. One thing the leather curb does is hold it shape witch makes it easier to put the bridle on and off.

    December 10, 2010 at 3:09 pm #63893
    LStone
    Participant

    Looks like the real thing Donn. Good for you!

    December 10, 2010 at 3:36 pm #63891
    dominiquer60
    Moderator

    I don’t know enough about harness fit to comment on that at all, but i think it is slick how you were able to make the change without making a single stitch on the traces, great job.

    Erika

    December 10, 2010 at 4:13 pm #63899
    mitchmaine
    Participant

    great photos of work in progress. easy to follow along. great job.

    mitch

    December 10, 2010 at 7:32 pm #63896
    CharlyBonifaz
    Member

    thanks big time! for the selfexplanatory pictures

    December 10, 2010 at 7:53 pm #63886
    grey
    Participant

    Oooo I bet it was hard to make the first slice through perfectly good leather traces!

    Did you seal the cut ends on the stitching? Or tie them off?

    December 10, 2010 at 8:43 pm #63887
    grey
    Participant

    How did you attach the end of the fore tug to the D-ring?

    December 10, 2010 at 8:58 pm #63881
    Donn Hewes
    Keymaster

    Grey, I didn’t do anything to the cut ends of stitching. It probably would be a good idea to, but I couldn’t see an easy way to. The metal repair clip does cover and hold those thread ends though. Yes, it was a little hard to cut into good tugs. The repair clips obviously don’t go on the D ring so at first I was a little stumped. Mitch explained that after I cut it and repair it I can simply flip it end for end and put the repair clip at the hames and put the all leather end on the ring where they will absorb some of the shape. The D ring unbolts so you can slip straps on (the rear tug is attached at the bolt). You can see in the last picture the shine rivets are where the new repair clips are.

    It is all ways interesting to see the under side of some of the parts I am taking off. One quarter strap was almost through. Other britchens will need a few more copper rivets before they go back out! I can make some nice new market straps from the breast straps I am taking off.

    December 10, 2010 at 9:47 pm #63875
    Rod
    Participant

    Nice job Donn and photos but I was trying to see around the horses in the picture to the plow. We are still waiting for our first snow but I have my plow ready and an anxious to try it out.

    December 10, 2010 at 10:05 pm #63878
    simon lenihan
    Participant

    Top class job.
    simon lenihan

    December 11, 2010 at 12:58 am #63898
    Andy Carson
    Moderator

    Looks great! Have your horses been in a D-ring harness before? Did they take to it right away?

    December 11, 2010 at 3:59 am #63888
    grey
    Participant

    @Donn Hewes 22756 wrote:

    Mitch explained that after I cut it and repair it I can simply flip it end for end and put the repair clip at the hames and put the all leather end on the ring where they will absorb some of the shape.

    OHH! Yes, makes perfect sense and now that you say it, it is perfectly obvious.

    December 11, 2010 at 4:56 am #63892
    TaylorJohnson
    Participant

    Very cool , great job. Taylor JOhnson

    December 11, 2010 at 8:26 am #63895
    OldKat
    Participant

    Donn,

    Darn nice job on the D ring and also on the step by step photo documentation. Almost feel as if I could do it myself, just by looking at the pictures.

    December 11, 2010 at 12:11 pm #63882
    Donn Hewes
    Keymaster

    Those pictures were from the first few minutes of a D ring harness for any of my horses. Even with the tongue not being held up right (the suspension doesn’t really work well when only one of three is wearing a D ring harness), that mare seemed very comfortable with it. She is a pretty easy going horse.

    I took off the trace carriers from her harness; so far I like that but would be interested in other opinions. Started my second harness, but it was in worse shape starting out. Hand to go to the collection of old tugs to find one I could cut. I am waiting for a Christmas present of copper rivets from Midwest Leather so I can make repairs to the britchen and spider straps.

    Anyone not familiar with putting in a solid copper rivet to repair your own harness?

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 30 total)
1 2
  • You must be logged in to reply to this topic.