david bradley x ray sulky plow

DAPNET Forums Archive › Forums › Equipment Category › Equipment › david bradley x ray sulky plow

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 21, 2010 at 4:14 pm #42229
    blue80
    Participant

    Does anyone have expertise to help me set up a David Bradley x ray sulky plow, and the pros and cons of this plow?

    Thanks, Kevin

    January 1, 2011 at 5:41 pm #64142
    blue80
    Participant

    My first attempt at youtube, a walkaround of the plow. Should the coulter be higher?

    http://www.youtube.com/watch?v=edCdZ_YeIRY

    January 1, 2011 at 8:30 pm #64141
    Tim Harrigan
    Participant

    A little hard to tell from the video, but it looks like the coulter is too far back, too low, and too close to the landside. The coulter should run just a few inches deep to cut the residue or sod. It generally runs a half inch or inch to the left of the landside. If it is too deep it will not cut the residue, just push it along. It needs to roll on to the residue like a scissor cut. Looks like it should move forward a few inches as well.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.