DAPNET Forums Archive › Forums › Equipment Category › Equipment › wire crane
- This topic has 6 replies, 2 voices, and was last updated 13 years, 2 months ago by
Anonymous.
- AuthorPosts
- September 23, 2011 at 8:24 pm #43066
simon lenihan
Participanti can not seem to post more than 5 pics on one thread.
simonSeptember 23, 2011 at 9:32 pm #69331ParticipantI hope this works
September 23, 2011 at 9:38 pm #69332Participantmore pics of wire crane
September 23, 2011 at 9:46 pm #69333Participantmore of the same
September 23, 2011 at 9:50 pm #69334Participantlast few pics
September 24, 2011 at 12:54 am #69336Anonymous
InactiveThanks Simon for posting these pictures. Its well built.Having some thing to work from is a large help. I’ll post some pictures as I build mine , hauled the first load of logs with the running gear today and looking forward to building the crane on rainy days this fall.
Cheers Tristan
September 24, 2011 at 8:01 am #69335ParticipantThis piece of kit work very well and i have seen it working and was very impressed. The first impression when looking at the wire crane is that it will tip over easy, this is not the case. Loaded with 4 or 5 average size logs first it then becomes very stable and can then load logs up to 2000lb. In picture 6 clockwise, directly under the honda engine you will see where the hydraulic ram goes [ removed to be repaired from this model ] this will lock up the frame which is really necessary. The ackman front axle will travel over everything while maintaining a level load in the bunk. It was mentioned in another post about working steep slopes, well this piece of kit makes the job alot easier. In can be used in conjunction with a sky line, snatch block to good efect. It can be fitted with a trailer for farm use, its down to ones imagination what can be achieved with this piece of kit.
simon lenihan - AuthorPosts
- You must be logged in to reply to this topic.