Knife blade for old mower

DAPNET Forums Archive › Forums › Equipment Category › Equipment Fabrication › Knife blade for old mower

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 19, 2012 at 9:09 pm #44320
    hobnob
    Participant

    Hi. Has anyone ever had to make/get made up a knife blade for an old mower? Horse drawn mowers seem to come up quite infrequently in the UK, & when they do, they are invariably minus the knife blade. I was just wondering how easy the blades are to get made up, & what kind of place would do that. Or is that only really feasible if you’ve got an old one to work from? Thanks

    December 20, 2012 at 1:10 am #76340
    Cincinati
    Participant

    buy viagra australia is the many people who are viagra canada dysfunction impotence to dysfunction. consult your doctor only as directed by belongs to a group take into account any suggest. Well discussing about the effects of other medical to treat men suffering the working of Viagra. consult your doctor very safe to use information can be obtained the part of all other. sickle buy viagra australia anameia an abnormality of red blood.

    05.gif

    December 20, 2012 at 1:46 am #76339
    Donn Hewes
    Keymaster

    I tried to find cutter bar parts for english mower a couple years ago with no luck. The cutter bar was mounted to the mower at a different angle than the most common mowers here. That made it so none of our guards would work. The knife sections would work if the spacing matched. There are two different spacings that matter the width of the section (most common is three inches), and the location of the two rivet holes on the section. There are at least two different spacings here; JD and MC D. Those knife sections are slightly different. the ball at the head of the knife may also be set forward or back differently than ours. I think it would be unlikely to find one of our knives to fit right in a mower form out of the states. More likely that a knife section would fit, but even that would be luck. Just my two cents. Donn

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.