DAPNET Forums Archive › Forums › Draft Animal Power › Horses › 7 horse hitch plowing
- This topic has 14 replies, 11 voices, and was last updated 14 years, 6 months ago by jac.
- AuthorPosts
- May 2, 2010 at 5:08 pm #41628Draft Horse PhotosParticipant
I got pretty beat up when I joined this forum last year and first posted my favorite photo of Charles Orme driving his 7 horse hitch because I did not show enough details in the photos I posted. So this year when Charles hooked up his 7 at the Kentucky State Horse Plowing Contest, I made sure to capture a lot more photos showing how he had them hooked. He also had a Pioneer 2 bottom gang plow with an electric/hydralic lift system to raise the plows out of the ground when he completed each pass. He asked me to be sure to take photos that captured the new plow for him. I will include links to a couple of those photos in a separate post. More photos are posted on my website at http://www.DraftHorsePhotos.com. Click on the 2010 Ky State Plowing Contest link. Here are links to a few photos that show the way Charles had his hitch rigged up:
May 2, 2010 at 5:17 pm #59881Draft Horse PhotosParticipantHere are the links to photos showing the Pioneer gangplow mentioned in my first post on this thread:
Rick Conley
http://www.DraftHorsePhotos.comMay 2, 2010 at 5:37 pm #59874CharlyBonifazMemberThanks!! 😀
May 2, 2010 at 6:38 pm #59872greyParticipantThose are great photos! Thank you!
I know I’ve rattled on at length about point of hitch and maintaining the shoulder/collar/hames angle, but the third photo in the first post is a great illustration. It shows one of those uncommon instances (this instance being the rope-and-pulley hitch) where the point of hitch is high enough that the belly band and market strap should be adjusted to keep the collar lying correctly against the shoulder, for maximum comfort and efficiency of labor. A wide belly band would also increase the horse’s comfort.
The photo shows a slight kink in the traces where the belly band is anchoring the tugs down somewhat, but not much.
With this many animals, it is highly unlikely that any one horse will be substantially inconvenienced. The horsepower provided is far more than is required, so the teamster doesn’t have to milk out every detail to the horses’ advantage.
However, if a person were to increase the work load (fewer horses, more shares in the soil, heavier soil, longer work day, etc.) and make a habit of it, it would be effective to outfit the lead set of horses with wider belly bands and adjust the market strap/belly band ratio to keep the front part of the tugs 90 degrees to the shoulder.
May 2, 2010 at 7:47 pm #59875CharlyBonifazMember@grey
when I saw that picture, I actually had your voice in my ear
@all
front horses are with lines, so this is where the stearing is
horses in the back are “lead” by being hooked to the traces of the front horses?May 2, 2010 at 8:50 pm #59878Andy CarsonModeratorI am just curious… What is the advantage of setting up the horses with 3 leaders and 4 behind rather than 7 across? It would be a wide hitch, but the field looks big and flat. It would maintain an efficient line of draft. Is turning the limitation?
May 3, 2010 at 1:07 am #59871PlowboyParticipantHitching too many horses abreast causes side draft on the horses when plowing. The hitch point and the center of draft are too far off on a two bottom to track right. Even 4 abreast is pushing it even with an equalizer evener. Tandem hitches are the way to go. Myself i prefer even numbers as it eliminates alot of leverage concerns that you may have in an odd numbered hitch. I just got finished plowing with six on a two bottom for two days with a straight on rope and pulley hitch. Simple direct and efficient! THe only reason to use seven is if you wanted to use 8 and one came up lame.
May 3, 2010 at 1:57 am #59873OldKatParticipantSorry to hear that you got beat up for not posting pictures with enough detail last year. Happy it didn’t stop you from posting more this year though! GREAT pictures; wish I had those skills. Please post more often.
Going to your website now to see more of your work.
May 3, 2010 at 2:06 am #59870Carl RussellModeratorThanks Rick, It is satisfying to see pictures with these details. Truthfully, I thank you. I know the “market” would rather see heads, but I truly appreciate your gesture. And they definitely show your skill and eye as well.
Grey. Thanks for beating the drum.
Carl
May 3, 2010 at 2:40 am #59879Andy CarsonModerator@Plowboy 17967 wrote:
Hitching too many horses abreast causes side draft on the horses when plowing. The hitch point and the center of draft are too far off on a two bottom to track right.
Thanks Plowboy, I figured there must be a good reason I have never seen more than four abreast…
May 11, 2010 at 6:29 pm #59877wally bParticipantWhat I don’t understand is how you can do a rope and pully hitch with 3 and 4. It looks like the near horse in the rear is hooked directly to the evener. Wouldn’t that horse be pulling against the two horses on the other arm of the evener? And then there would be an imbalance of 3 on the left pulling against 4 on the right. Am I missing something?
wally b
oregonMay 11, 2010 at 6:56 pm #59882jacParticipantHi Wally, the near horses evener will have a heavy offset to the right so that the horse has a lever advantage over the others..
JohnMay 11, 2010 at 7:07 pm #59880mitchmaineParticipanthey john, i see what you mean. i was thinking the same as wally, but in the 2nd picture the near horse has a two to one advantage to the lead and wheel horse next to him on the same evener, equalling it out. thanks for pointing that out.
May 12, 2010 at 10:01 am #59883jacParticipantIn fact it looks as though the near wheel horse has his off fore leg over the rope. It must be hard to keep it all together on the turns..
JohnScrub that.. just the angle of the foto.. sorry
JohnMay 13, 2010 at 5:36 pm #59876TBigLugParticipantThanks for the pictures. Looks like alot of fun.
- AuthorPosts
- You must be logged in to reply to this topic.