IHC Mower Oil Seal part numbers De-mystified!

DAPNET Forums Archive › Forums › Equipment Category › Equipment › IHC Mower Oil Seal part numbers De-mystified!

Tagged: 

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • January 19, 2016 at 2:25 pm #87325
    hardpan99
    Participant

    This took me a while but I finally found modern cross-ref part numbers for the original IHC seals on the #7 and #9 mowers. Note that the #7 and #9 share the same axle and flywheel shaft seals. Good Luck!

    #7 Axle
    IHC MA22439, SKF 15620, NAPA NOS15620

    #7 Flywheel Shaft
    IHC M22440, SKF 11170 or 11171, NAPA NOS11170 or NOS11171

    #9 Axle
    IHC M42523, SKF 15620, NAPA NOS15620

    #9 Flywheel Shaft
    IHC U17944, SKF 11170 or 11171, NAPA NOS11170 or NOS11171

    #9 Clutch Shaft
    IHC 20359D, SKF 6229, NAPA NOS6229

    January 19, 2016 at 5:49 pm #87330
    Donn Hewes
    Keymaster

    That is great work. Thanks for doing that. Donn

    January 19, 2016 at 8:04 pm #87344
    daniel grover
    Keymaster

    Super helpful, thank you!

    January 19, 2016 at 8:39 pm #87345
    Mike Rock
    Participant

    Thank you!
    About to work on six mowers. Getting a new shop up, 40’x64′ with a 15’x32′ lean on one side for the machine shop. YEAH~~ Been fifty years a’coming!

    January 19, 2016 at 9:37 pm #87346
    Jay
    Participant

    Great resource! Thanks for doing it. Jay

    January 20, 2016 at 7:09 am #87348
    hardpan99
    Participant

    It took finding the skf seals master interchange document online. Its a massive pdf file and the only one listing the old IHF parts. For those who are looking for any old seal (Case, John Deere, etc.), it might be in there too.

    SKF Seals Master Interchange – SKF.com

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.