DAPNET Forums Archive › Forums › Draft Animal Power › Oxen › Oxen tip cart
- This topic has 7 replies, 6 voices, and was last updated 14 years, 9 months ago by fabian.
- AuthorPosts
- January 26, 2010 at 10:17 pm #41356RodParticipant
This is an antique replica of a tip cart. The plan I had was for a horse with shafts (don’t ask me how they drove it because it had not seating provisions) but I modified it with the pole. It is heavy built and I think will require two oxen to pull it when its loaded. I still have to paint or stain it, something I don’t like to do as it covers up the joinery. It will tip up much higher than the photo shows.
January 26, 2010 at 10:49 pm #57336VickiParticipantWow! Gorgeous! “Covet not thy neighbor’s ox cart…”
January 26, 2010 at 11:47 pm #57338CharlyBonifazMemberbeautiful; painting is a must? oil? glaze? clear coat?
January 27, 2010 at 12:06 am #57333RodParticipant@CharlyBonifaz 14941 wrote:
beautiful; painting is a must? oil? glaze? clear coat?
This is a design based on an old Scottish cart of a type which was common to the time period and which were usually painted with red wheels and a blue body. I was thinking about black wheels, hardware and lettering with a light transparent stain under polyethylene top coats.What do you think?
January 27, 2010 at 3:05 pm #57339fabianParticipantThank you Rod for posting the pics.
I’m going to build a similar cart in May. For now it is to cold for me to work outdoor .;)January 28, 2010 at 2:28 am #57335HowieParticipantThat sure is one nice ox cart.:)
I have all the material to build one like it, but I am having a little trouble with my get-up and go.:o
Would it be possible to get a set of plans for that one?:cool:January 28, 2010 at 2:31 am #57337OldKatParticipantGee, what a nice cart. You are a craftsman for sure. That is an excellently executed project.
January 28, 2010 at 12:45 pm #57334RodParticipant@Howie 14992 wrote:
That sure is one nice ox cart.:)
I have all the material to build one like it, but I am having a little trouble with my get-up and go.:o
Would it be possible to get a set of plans for that one?:cool:Hi Howie
The sheet size for the set I have is too big for me to copy but you can get a new set from the web for $26. Here is the address for the plan http://www.wildhorsebooks.com/thompson.htm
It’s half way down the page plan no. JT2a.
This is an excellent plan, well detailed and can be used to build a model or the full sized cart. Let me know after you get it if you want photos of how I adopted it to a pole as the plan is setup for shafts. I made some other changes also to make it easier to construct which you may be interested in also.. - AuthorPosts
- You must be logged in to reply to this topic.