Draft Animal Power Forum 200X-2019
DAPNET Forums Archive › Forums › Equipment Category › Equipment Fabrication › Plow Bolts
Plow bolts are used to attach metal so no bolt head is on the outside of the wear area.
Like on plows, hence the name.
This type of bolt was also used on runners of sleds.
Link to picture below
http://www.cfi1.com/images/products/plow-bolts-1.jpg
I cannot find a manufacture that still make a size smaller than 3/8.
Would appreciate it if anyone could let me know were 1/4″ plow bolts can be found.
I would prefer not to fab up myself out of carriage bolts.
Thanks for any help you send.
I was forced to use carriage bolts and grind the head off.