DAPNET Forums Archive › Forums › Equipment Category › Equipment › Singletree Grab Hook
- This topic has 24 replies, 14 voices, and was last updated 12 years, 12 months ago by ShireLover.
- AuthorPosts
- December 1, 2011 at 10:28 pm #70175ShireLoverParticipant
@highway 30641 wrote:
Here are some pics of what I use. Very simple design incorporating the handle John spoke of to keep your hands free of the hook.
https://picasaweb.google.com/107396364480794542661/LoggingGrabHook#
Ed
I get a page not found from the link.
Eric
December 1, 2011 at 11:01 pm #70155Carl RussellModerator@john plowden 30628 wrote:
Carl – Nice hook – wont snag on roots etc. – you have to feed entire chain through though and fingers are close to potential pinch point- …
No actually, I don’t feed the entire chain through. Just a few links and a loop. Fingers are never close to pinch point as I use the ring portion when lifting the evener, but when hooking chain I hold the end of the grab…. there is a nubbens on both sides so one can pinch the link easily even with mittens on. Very fast. Never comes unhooked.
Furthermore I don’t hook with one hand. I don’t hold lines while hitching logs.
Carl
December 1, 2011 at 11:03 pm #70156Carl RussellModerator@kevint 30626 wrote:
Carl, What do you think of the quality of you new swivel?
Haven’t pulled any wood with it yet, but they look really well built, and seem strong enough.
Carl
December 1, 2011 at 11:50 pm #70169Ed ThayerParticipantSorry about the link, I fixed it.
Here it is https://picasaweb.google.com/107396364480794542661/LoggingGrabHook#
Ed
December 2, 2011 at 12:03 am #70167Robert MoonShadowParticipantThis, and other comments here are what I’m referring to in my post in “suggestions” for tutorials…a few pictures demonstrating various techniques (even a short video, although on dial-up, that’s not usable) to go along with a word description would sure help a visually-oriented person such as myself. I think I’m getting a basic idea, but not sure.
December 2, 2011 at 12:36 am #70173JayParticipantI use one of these key hole grabs and love it. Contrary to what I think John said, you DONT have to feed the whole chain through it – just drop a short loop through and let the end follow where it will – safer and easier than a grab hook. Jay
December 2, 2011 at 1:14 am #70165jen judkinsParticipant@john plowden 30622 wrote:
I’m on it – Maybe a stocking stuffer 🙂
Well, I’ll be seeing your wife on saturday…and will be attending the Logging workshop with Reno. We need to be logging in style…so get your fire going, mister.
December 2, 2011 at 4:56 am #70172RoscoeParticipanthttp://www.aaronmartin.com/images/catalogue/product/461.jpg Are you looking for something like this?
December 2, 2011 at 4:48 pm #70174ShireLoverParticipant@Roscoe 30659 wrote:
http://www.aaronmartin.com/images/catalogue/product/461.jpg Are you looking for something like this?
Yes that is basically what I am looking for but was hoping to find it cheaper than that.
Eric
December 2, 2011 at 7:20 pm #70163Does’ LeapParticipant@ShireLover 30633 wrote:
A somewhat related question. What kind of chain do you use? Length, size, what’s on the ends?
Thanks,
EricEric, here is an assortment of chains I use in the woods.[IMG]https://lh4.googleusercontent.com/-rj55Aux6_Ts/Ttkb6IXynyI/AAAAAAAABEI/ut9EnbWgHC0/s800/P1030522.JPG[/IMG]
The chain on the upper right is what I use to hook to logs. It is 5/16″ x 10′ with a slip hook on one end and a 3/8 needle on the other. The needle is round stock bent with a torch. When I am logging single, I use one of these chains and and carry the synthetic winch cable (covered below) on one of the hames. When I am logging with 2 horses and an arch, I carry two of these chains. I also carry a 5/16″ x 20′ chain with a grab on both ends (middle of picture). This chain is used as an extender to grab marginally accessible logs. I attach the choker chain to the log, then attach the long chain to the choker chain which grabs just below the needle, and then to the arch or double-tree. I can also add my second choker chain in there for a reach of 40′. This is often useful if logs are in a very wet areas or on steep ledge ground. The blue rope is 7/16″ synthetic winch cable with a bull hook in the middle (see picture below). This, in conjunction with a pulley, is used to pull down trees that are hung-up. I have also been using this light rope to serve the purpose of the 20′ chain I described above. I have a grab on one end and use the bull hook to attach to the single/double tree. I also carry a short section of 5/16′ chain with two grab hooks on it. When I have 2 logs chained that I can’t quite reach with the logging arch, I will attach this double grab to each log and then hook it to my longer double-grab chain to pull both at the same time. Clear as mud?
Good luck.
George
[IMG]https://lh4.googleusercontent.com/-qk0o8USISpk/Ttkb3ElqroI/AAAAAAAABEE/En8ir1d_lLs/s800/P1030496.JPG[/IMG]
- AuthorPosts
- You must be logged in to reply to this topic.